Jacketing Isolpak CLAD
The unique adhesive system of ISOLPAK CLAD 7 LAYERS offers excellent resistance to humidity and moisture, UV exposure and allows application in a wide range of weather conditions including lower temperature areas.
Product introduction
Play VideoMounting options
Play VideoRendering
Isolpak CLAD benefits
Unbeatable advantages, low material cost, ease of Material preparation and fast installation
ISOLPAK CLAD is the revolutionary way of weather-proofing insulation: completely self-adhesive, it doesn’t require additional adhesive or mastic to create a seal or any special expensive tool.
ISOLPAK CLAD can be used for sealing of seams and joints of aluminum coated insulation systems in air ducts and pipelines and for large-area lamination systems.
- Coated with acrylic adhesive: it sticks extremely good on aluminum-laminate systems
- Zero permeability: barrier against water and water vapor
- Resistant to cold weathering
- Very good ageing properties
- Solvent free and extreme low VOC (Volatile Organic Compounds) values
- Great chemical resistance
- Easy to apply at high and low temperatures
- Easy tool free installation
- Time, labour and cost savings
- Puncture and tear resistance
- Available in 5 colors: white, silver, grey, black and silver embossed
1
Adhesive film Polyacrilic X-Linked: special adhesive for superior cold weather adhesion and for application on sites
2
Pure aluminum: technical advantages as zero permeability
3
Polymer film: the great advantages of PVC
4
Pure aluminum: technical advantages as chemical resistance
5
Polymer film: the great advantages of PVC
6
Pure aluminum: technical advantages as very good ageing properties
7
Transparent UV protection film: protection from external influences and corrosion, also in difficult environments
Result:
- Self-adhesive alternative to metal jacketing
- Excellent resistance to UV exposure, humidity and moisture
- Easy, fast and clean installation
Technical Data Isolpak CLAD
| Characteristics | Metric value | US value |
| Thickness | 0,15 mm | 7 mil |
| Elongation at break | > 50% | |
| Tensile strength | > 55 N/cm | 6 lbs/in |
| Adhesion to steel | > 12 N/cm | ca. 97 oz/in |
| Temperature resistance | -40 up to +130°C | -40 up to +270°F |
| 180° Peel on SS 24h | 36 N/25mm CF |
